기술 관련 기사
The user interface as a "mechatronic integrated device" (MID) - Transfer project for monitoring damp inside medical device controls
As part of a transfer project of the "it´s OWL" cluster of excellence, steute is investigating the integration of sensors in medical device control enclosures. More specifically, sensors for monitoring any penetration of damp. Two innovative manufacturing techniques are being combined in this investigation: laser direct structuring (LDS) and additive manufacturing (AM). The results are very promising – and will turn the user interface into a "mechatronic integrated device" (MID).
Source: meditronic-journal 4/2024
Customised user interfaces - Control systems in the OR
The proportion of control systems which are customised is growing rapidly. Preparations for the interoperable OR, where multiple medical devices are controlled via a central user interface, are also progressing at full speed. The benefits of customised user interfaces will be explored in this article.
Source: DeviceMed (01/2024)
User interface with integrated sensors
More functions for foot switches - The OR user interfaces of the future will be mechatronic integrated devices (MID) with special surfaces. Thanks to new production techniques, it is now possible to integrate conductive paths, sensors or antennas in the surfaces. Examples can be seen at the Medica.
Source: medizin&technik (06/2023)
OR.NET: for integration in the OR – SDC also with real-time data transmission
Some tasks in the OR require a real-time link between interoperable medical devices. Corresponding extensions to the SDC standard compiled by OR.NET are in preparation. At the Medica 2023, these extensions will be shown at the steute Meditec booth.
Source: Published on the website of medizin&technik (10/2023)
SDC: Operate multiple medical devices using a single control - New tasks and new technologies for user interfaces
Wireless user interfaces are now standard in the OR – and enable multiple medical devices to be controlled by a single user interface.
Source: meditronic-journal (2/2023)
Sensors and antennas are best when integrated
In a project by the cluster of excellence it´s OWL, steute is currently testing the integration of sensors and antennas in the enclosures of control systems and user interfaces for industrial, as well as medical applications. A combination of laser-direct structuring and additive manufacturing is being used. The results are extremely promising.
Source: etz (11/2022)
The benefits of remote control - Trends in user interfaces for medical devices
Medical devices in the OR are now usually connected to their corresponding user interfaces by remote control. This makes additional documentation necessary, but the advantages still far outweigh any disadvantages, and device manufacturers can purchase the systems with all the necessary approvals in place. Furthermore, radio technology is a prerequisite for interoperability in the OR: in the future, multiple medical devices will be operable via a single (wireless) user interface. First applications using this technology, known as SDC (Service-oriented Device Connectivity), are already available.
Source: NET (5/2022)
User interfaces: from manufacturer to service provider
Wireless user interfaces have multiple benefits, making them a popular choice in many medical disciplines. However, they also involve a higher level of effort for device manufacturers with regard to testing and documentation than cabled controls – unless the supplier is MDR-ready and able to provide the user interface with all the relevant documentation.
Source: meditronic-journal (2/2022)
Wireless benefits
Nearly all customised user interfaces developed by steute Meditec in cooperation with medical device manufacturers communicate with the device in question via remote control. And wireless command devices are also becoming increasingly popular as standard user interfaces – with good reason.
Source: medical-design (02/2022)
The digital operating theatre
In Löhne, situated in East Westphalia, the operating theatre of the future is already reality: foot switch specialist steute Technologies GmbH & Co. KG has developed a multi-purpose foot control which enables surgeons to operate different medical devices from different manufacturers.
Source: VDMA Magazin (11/2020)
Switchgear manufacturer undergoes digital transformation
steute Technologies is known as an expert for safe switchgear in complex and demanding applications. But over the last few years the company has also grown to become a systems provider. Today's customers can profit from complete solutions which range from sensors via Gateways to integration in ERP systems. In an interview, Stefan Schmersal, Acting Partner at steute, gives insights into the market, his own solutions and business strategies, as well as the challenges steute will face in the future.
Source: open automation (05/2019)
Interfaces for the interoperable OR
With the dynamic integration of devices in the "interoperable OR", new interface generations are emerging.
Source: meditronic-journal (01/2019)